Other chargers with lower power may limit their performance and even shut down due to the overcurrent protection mechanism.įit for Apple MacBook Air Pro After 2012 year, DO NOT Fit Before 2012 year. > The Power of the PD Charger is more than or equal to the power of your original charger. > We recommend to use Apple 87W original chargers or above, and the PD charger just only has one output port. If your laptop input is 16.5V 3.65W 60W, then your USB C adapter is not lower than 60W. For example, your laptop input is 20V 4.25A 85w, the your USB C adapter is not lower than 85W, otherwise, it won't work. Make sure Your USB Type C Adapter's wattage (volts and Ampere) is not lower than your laptop input (you can check it on the bottom of your Laptop). > Please make sure the PD charger have enough Power. ( We recommend to use Apple 87W original chargers or above, and the PD charger just only has one output port.)īuild-in the PD Inducing Chip and E-Mark Chip Power Requirement: Please Make sure the PD Charger have enough Power. Name: 100W USB-C to MagSafe 2 (T-Tip) PD Charging CableĭC Output 15V~20V Max 100W to Magsafe 2 (T-Tip) Connector *Build-in the PD Inducing Chip and E-Mark Chip *Compatible with most USB-C wall chargers with Power Delivery (we recommend 90W USB-C charger and above) *1.8meter is long enough to connecting devices while you are still charging in your bedroom, office or wherever you want. *Say good bye to buy an extra adapter (?Only for Charging, not Syncing data.) (?NOTE: Charging speeds will vary depending on your device and wall charger, we recommend that you use USB-C PD Charger) *Designed to charge your devices for laptops with USB C PD charger.
0 Comments
Leave a Reply. |